EJ22 Short Block With Heads

cults3d

Subaru EJ22 Boxer engine. When assembled, all included parts are fully functional as in all moving parts rotate and slide as intended in the real thing. Do not confuse it with a real engine, as this is not. This engine assembles like the full scale real engines. The scale is 1/4 (25%) of the original. The tolerances are a little tighter and depending on your printer the Block halves might take some tweaking to get it right so that there is not interference while rotating. Note: The engine was reversed engineered, and is not 100% accurate. The following are included in the folder: The two block halves, Crankshaft, Connecting Rods, Connecting Rod Caps, Wrist Pins, and Pistons. SOHC Cylinder Heads are also included. Only the Cams, Covers, Cam Cradle, and blocks. Intake Manifold and Oil Pump are also included. After the crank shaft pieces are printed they need to be glued together. Cranks Shaft P1 and Crank Shaft P2 are glued by the counter weights, while the rest are glues with the corresponding tabs. Note: hardware is required if you want to assemble it. Such as of m2, m2.5, m3, and m4 fasteners at various lengths.