Effecteur Magnetic + Sonde bed auto leveling intégrée / Effector

thingiverse

This text appears to be a tutorial on how to configure and use bed leveling features in Marlin Firmware, specifically for a 3D printer. The tutorial covers the following topics: 1. Defining the probe offset: The text explains how to define the X, Y, and Z offsets of the nozzle from the extruder. 2. Configuring the probing speed: The text explains how to set the XY travel speed between probes and the Z axis raise before and after probing. 3. Enabling bed leveling: The text explains how to enable bed leveling by defining `Z_SAFE_HOMING` and `Z_MIN_PROBE_ENDSTOP`. 4. Reassigning pins for bed leveling: The text explains how to reassign pin 18 from the Z_MINI sensor to the bed probe, and pin 32 from the LCD to the bed probe. 5. Verifying the limit switches: The text explains how to use the `m119` command to verify that the limit switches are working correctly. The tutorial also provides some additional tips and precautions, such as: * Warming up the HotEnd before performing an auto bed levelling * Disabling the probe after bed leveling is finished * Using a Start g-code script to perform the auto bed leveling Overall, this text appears to be a comprehensive guide for configuring and using bed leveling features in Marlin Firmware.