EDC Bolt-action Pen
cults3d
Version 2 available here: https://cults3d.com/en/3d-model/gadget/bolt-action-pen-v2-edc For a while I wanted a bolt-action pen, but most of them are pretty expensive, so I decided to make my own. These two pens don't need any additional screws or other hardware. You just need a 3mm diameter pen refill and a standard pen spring. I designed these pens around a regular 3mm diameter pen refill, that can be found in basic click pens, because I couldn't find any of the more popular EDC pens in stores around me and I assume other people have a hard time finding them too. For the micro version, you need to cut the pen refill down to 60mm and for the XL version - 100mm. The micro version is 72mm long and 8mm wide. It is perfect for EDC, because It is small and light. The XL version is 120mm long and 12mm wide. I designed this for more heavier writing tasks(for school or office, etc.). For micro version, print: micro_body_v3.stl micro_bolt_v3.stl micro_end_cap.stl For XL version, print: XL_body.stl XL_bolt.stl XL_end_cap.stl If you like this project and would like to support me in developing new projects, kindly consider donating here: https://ko-fi.com/gama3d All donations will go towards developing future projects. If you would like a custom design of this or any other project of mine, e-mail me at: 7b7bruno@gmail.com
With this file you will be able to print EDC Bolt-action Pen with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on EDC Bolt-action Pen.