Echo Dot G3 mount with riser

prusaprinters

<p>This is a simple remix of the already fantastic 3 finger mount designed and shared by Stevetecx.</p><p>I used this "wall mount" to mount our Kitchen Dot out of the way under the cabinets. However, I wanted a place to be able to wrap up the cord, so I designed a very simple 1/2" (12.7mm) riser. It turned out to be the perfect amount of space to not make the Dot super obvious under the cabinet and provided the intended cord wrap. To make the cord stay wrapped, I simply crisscrossed the cord over itself before plugging it into the Dot and the outlet.</p><p>I originally added the riser to the mount so it was one piece, but I found it was going to be much easier to print as 2 pieces. However, I have included both options here if you want to try a one piece print. I have done my best to minimize the need of supports for the one piece print, but I believe it will still need supports</p><p>I have also included Stevetecx's mount file here for convenience (however I resaved the file to reduce it's size by 9MB).</p><h3>Print Settings</h3><p><strong>Printer:</strong></p><p>Voxelab Aquila</p><p><strong>Rafts:&nbsp;</strong></p><p>Doesn't Matter</p><p><strong>Supports:</strong></p><p>Doesn't Matter for two piece print</p><p>I think the one piece print could be printed with 80deg overhang to reduce needed support, but I've never tried it.</p><p><strong>Filament:</strong></p><p>Shouldn't Matter &nbsp;(I used IEMAI PETG Transparent)</p><p>&nbsp;</p><p>Category: Organization</p>