eBike battery chargin stand for Shimano BT-E8010

prusaprinters

<p>A simple stand that holds the battery upright. It might fit some older/newer Shimano batteries too, as long as they fit into the same bike. <strong>Open the charging port cover before inserting the battery</strong>!</p><p>If the stand feels a bit top-heavy with the battery in it, I left a couple open cavities in the bottom to fill with some heavy material like cement, or sand/gravel with glue/epoxy resin or similar.</p><p>There's also a cable route in the bottom, if your electric plug is on the wrong side of the stand.</p><h4>How to print?</h4><ul><li><strong>PLA </strong>or <strong>PETG </strong>should both work just fine.&nbsp;</li><li>I designed it to be relatively simple to print, <strong>overhangs and bridging</strong> used should be trivial for modern printers.&nbsp;</li><li>Have a decent number of <strong>perimeters</strong>, this will be bumped by vacuum cleaners and shoved aggressively with batteries.&nbsp;</li><li><strong>Infill </strong>doesn't probably matter much, as this thing has so much perimeter even in the bottom.</li></ul>