EATON Buzzer mod

thingiverse

For my photobooth business I build a radio buzzer which will used to start the counter of my photobooth. I used an original buzzer from EATON and changed the lower housing. I added a batterie box and enough space for a PocketWizard PlusX electronic board. If you are wondering about the blue tape which sticks at the bottom of the housing. My bed is little bit too narrow to the nozzle. Of course, I could construct the whole buzzer but I had one in my cellar since ages, before I bought a 3D printer. The next one will be of course a complete construction. Parts list: Buzzer: https://www.amazon.de/FUß-GROBHANDTASTER-1S1Ö-FAK-R-KC11/dp/B0014DQI5S/ref=sr_1_1?ie=UTF8&qid=1491981036&sr=8-1&keywords=eaton+buzzer Batterie holder: https://www.amazon.de/gp/product/B000PEJQOW/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 Switch: https://www.amazon.de/gp/product/B00IKDQ0SK/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 PocketWizard PlusX: https://www.amazon.de/PocketWizard-Plus-X-Transceiver-433MHZ/dp/B00CFL93SC/ref=lp_1700280031_1_11?srs=1700280031&ie=UTF8&qid=1491984228&sr=8-11 For the batterie holder you have to change the cable guiding. Push the cables back thru the holes and put each cable to their own side (left/right). If you will take a look into the printed housing you will see why. You can see also that I cutted the holder in halfes, that the batteries are change able without pulling the holder out of the housing. The 8mm hole can be used with a 3/8 screw tab. After cutting the thread, it fits on the most tripods (only with a 3/8 UTC screw mount). Print Settings Printer: A8 Pursa i3 clone Rafts: Doesn't Matter Supports: Yes Resolution: 0.08 Infill: 18