EasyThreed X1/X2 40mm Fan Attachment

thingiverse

This is an attachment to install a 40mm fan on the EasyThreed X1/X2.\r\n\r\nI badly needed to add a part cooling fan to my printer but found it impossible to get hold of the tiny 25mm x 25mm x 7mm fan suggested by the company. The smallest 12V fan I could obtain locally was 40mm x 40mm x 10mm. I relocated the hot end fan that comes mounted in the printer head to become a part cooling fan since it was the right size and utilized https://www.thingiverse.com/thing:4258697. To replace the small fan I moved, I used this design to attach my larger fan on top.\r\n\r\nI printed three pieces then glued the Fan Casing.stl to the Platform.stl. Fan Cover.stl should fit smoothly on top. EDIT: Platform 2.0.stl sits better on top of the printer head and holds it together if, like me, you've broken the clips inside from opening and closing too often\r\n\r\nNote: If you're printing this on the stock EasyThreed X1 (and possibly the X2?) you'll need to mirror the platform and fan cover across the y axis so that the sides of the platform don't collide with the printer and interfere with the limit switch.