EasyGlider Nose and Canopy

thingiverse

Disclaimer* This is a Replacement Nose and Canopy assembly for the Multiplex EasyGlider. I designed this to replace the nose section on my easyGliders that were full of epoxy due to multiple repairs. Since I lost the original canopy some time ago, I decided to also design the entire nose section in order to create a replacement Canopy. I took multiple measures to make something that is very similar to the real part as possible. Due to the nature of this project, I'm not able to test every single cut you might make, so this is a work in progress. I also include full parts and some cut files in order to help you. # File List # ### Full Parts ### The following file are a single piece. You can use them and make smaller parts if your slicer allows it. There is a version with a motor mount (19x25 holes) and with right mount angles. I used a 30/35 Motor that fits well inside. Please note that no Servo Mounting spots are currently created. * EasyGlider_Nose_Motor_Full.stl * EasyGlider_Nose_Glider_Full.stl * EasyGlider_Canopy_Full.stl ### Canopy Parts ### The following list contains the 5 files that I created to print the Canopy. I made it thin with some structural border. * EasyGlider_Canopy_N0.stl * EasyGlider_Canopy_N1.stl * EasyGlider_Canopy_N2.stl * EasyGlider_Canopy_N3.stl * EasyGlider_Canopy_N4.stl ### Nose Parts ### The following list contains the 2 files that I used in order to replace the first part of the EasyGlider Nose. * EasyGlider_Fuse_Mount.stl * EasyGlider_Motor_Mount.stl ### Glider Version ### The following files are less resistant but are lighter than the other when printed. They are suitable for a glider version. * EasyGlider_Fuse_Mount_Light.stl * EasyGlider_Nose_Cone_Light.stl