Easy Vertical Green wall module (fits any pipe and pot)

thingiverse

Hi, thanks for liking my green wall. It's a breeze to make - just measure the inner size of any pipe you have. The module is 100x100 outer size, so feel free to adjust it as you like. I used a 55 degree angle, which is 100mm inner size, and that's easy to customize for your pot preferences. For top-notch growth results, place the pots at a 55 degree angle. If you need support for the pots, check out my 55degree angle made easy2.stl file. To get the best results, use 100% infill and nylon to print, and go slow - the slower the better. This system is super easy, even for first-time growers. You'll need about 2-4 liters of water per square meter per day. Circulating the water with an air pump will also work great. Keep in mind that the module is 100x100x100 outer size, and the inner reservoir is 50mm high - just note that if you drill a hole. Here's what you'll need: * Cotton cord (about 5-10mm) - the bigger the better, but a shoelace will do in a pinch. I used Kendo cotton for best results. * Pots or soil bags (check out the link below). * Plants, of course! I used a combo like the one shown in the picture. Some extra tips: * For outdoor use, it's best to use UV protective epoxy to keep it waterproof. Just apply one layer of epoxy - no glass fiber needed, and avoid applying it to the bottom. * I find that small organic grow bags and light soil mix work best indoors if your area is dry and hot. * If you're recycling water, use an air pump and enzyme to stabilize the pH, and add perlite to the soil mix for extra benefits. When it's scorching hot outside, try using terracottem in the soil and a little hydroponic rockwool in the wall module - just be careful not to block the water tube. Enjoy your green wall!