Easy to Print Index Knuckles and Vive Stock

thingiverse

https://youtu.be/62tMhLrH-x8 Edit: Added index paddles with finger holes. I wanted an easy to print adjustable stock. There were none so I made this one. I was able to print it on a Anet A8 that is wore out and has some issues. Some screws and bolts are needed but over all it is a simple build and easy to print. I uploaded the models in the orientation I printed them and only one piece needs supports as noted in the file name. Not only is the stock length and the length between controllers adjustable but you can also turn the paddles to you desired angel. The adjustment works the same way as an ar buffer tube and stock. I have also created a quick detach mono pod. I like this for longer range maps in onward. I recommend to rebind grip to the thump pad. No matter the stock or paddle design I used I had grip issues with the knuckle controls. Moving it to the thumb pad has alleviated this and hasn't caused me any issues with FPS games. I added Vive paddles. I do not have a vive any more but this should work. Let me know if you try them. Vitamins for stock 6 - #8x3/4 or so wood screws 2 - 1/4 x 1 1/2 shoulder bolts with nuts 2 - 1/4 x 3/4 bolts with nuts 2 - Springs that will fit over the 1/4 shoulder bolts but not the nuts. They should be lose coil springs to allow enough room in the sleeve for the bolt to be pulled completely out of the way of the buffer tubes. Vitamins for mono pod 4 - #8x3/4 wood screws 1 - 1/2 pvc 90 elbow 1 - #10 x 1 1/3 wood screw Some PVC and PVC cement