Easy small compact strong pan tilt

thingiverse

I've tried many pan&tilt systems here, but none of them have given me strong and easy fitting parts. So I decided to make my own. It's easy to assemble (if not, let me know! I can change it). Different options are available for you to choose from. The compact design is a plus. Here are the parts needed to complete it: M3x10 Screw, 2 x 9gram Servo. Optional parts include M3 ring and M3x4 Press-nut. Tools needed are a screwdriver and a hot glue gun or other adhesive if you don't like that. Instructions follow: (every photo is a step) 1) (Optional) Insert the M3x4 Press-nut in Part C. 2) Glue the servo in Part A1 (or A2 if you prefer that mount). 3) Glue the servo horn in Part B. Don't glue it upside down! Sand it down flush if needed. 4) Put the servo horn on the servo, and don't forget to center your servos! 5) Glue Part C onto Part B. 6) Insert the servo screw. 7) Glue the second servo into Part C. 8) Glue the small servo horn in part D1 (or part D2 if it fits better with your camera). 9) Glue Part E over the servo horn. 10) Place the servo wire over the servo and put Part D on top of it. If the servo is centered, Part D should be angled up a bit. 11) Now go to the other side of Part D and insert (optional: a M3 ring in between Part C and D) the M3x10 screw inside. This must be loose as this part should move. 12) Go back and put the servo screw into the servo. And you're done! Thanks for making it, and please let me know if it doesn't work for you! Print Settings: Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.3 Infill: 25 Notes: I used a 0.6 nozzle and a layer height of 0.3, which gives me fast prints, but you can choose what you want!