Easy Multi-functional Prusa

thingiverse

This 3D printer is still in its experimental phase, with Multi-Media Prusa potentially capable of printing, creating PCB boards, or Frostrude in the future. *9/19/2017* Updated Y Carriage and Y Endstop have been added. *9/23/2017* E3D_Mount has been added but not yet tested; a Wade Extruder mount update is soon to come. *10/1/2017* Added E3D with Capacitive and/or Inductive mounts, along with an X-carriage endstop sensor. *10/2/2017* BOM has been moved to each assembly video. Added x Carriage Generic front for E3d and Paste extruders, also known as the Paste/Chocolate/Pancake project (https://www.thingiverse.com/thing:2553286), which is still under development and will soon have a Z sensor added. *10/3/2017* Removed x-Idler.stl and replaced it with two new versions, X_Idler_5mm.stl and X_Idler_3mm.stl. Updated X and Y belt clasp as well. *10/7/2017* Arduino RAMPS 1.4 board holder has been added, along with a ZX Carriage Video. *10/9/2017* Video(s) for wiring capacitive and inductive sensors have been added. *10/14/2017* Removed X_Axis_Endstop.stl and replaced it with EndStopV2.stl (can be used on any axis), remember to cover pins with non-conductive tape or use a non-conductive bolt in 2020. *10/16/2017* T8 Idler(Z_T8_Holder.stl) attachment has been added, potentially replacing the M8 idler in the future. A possible update for the y axis end stop idler is also being considered. *10/21/2017* Removed X-Carriage attachment for E3D and replaced it with an Updated E3D with side mount for either a 40 mm fan or Inductive and Capacitive sensor(s). *10/23/2017* RAMPS 1.4 tutorials have been added. *10/30/2017* Added RAMPS 1.4 LCD tutorial; a final version of the printer will be posted in a couple of days.