Easy Display side mount for Prusa MK3/s (right or left)

prusaprinters

<p>Easy mountable Display side mount ;) (right or left)</p> <p>I designed this mount, cause my Printer stands sideways, and i also want a easy to assembly mount (after mounting is no new calibration needed).</p> <p>u need to Print:</p> <ul> <li>2x framebracket</li> <li>support one and two</li> </ul> <p>u also need:</p> <ul> <li>2x squared Nut (u get 4x by unmounting the standart supports, or from spare parts)</li> <li>2x Bolt (u also get 4x by unmounting the standart supports, or from spare parts) </li> </ul> <ol> <li>For assembly, u put the Square nuts inside of the just printed framebrackets, make shure these dont fall out easy. (maybe fix them with just a little bit of glue)</li> <li>put a long screw inside the other side and and screw it just 2-3 times.</li> <li><p>Now u are able to easy put the framebracket inside the frame of the Printer. If inside, u have to turn it 90°. (maybe a bit tricky and tools needed). If inside and turned, just pull a bit at the screw , u holding with, to fix the nut a bit.</p> </li> <li><p>Change the Original mounts at the Display with the fresh printed ones.</p> </li> <li>Put the screws inside the holes at the mounts, and carfully try to screw them intro the brackets. (each one just a little bit for beginning, than more, and after positioning the last bit) (maybe a bit tricky, but possible)</li> </ol> <p>"et voilà" its done.</p> <p>(befor first print, test that printbed had enought space, if not, u doing something wrong)</p> <p>I would be very happy about some feedback. Are u happy? what could be better?</p> <p>Have fun with it. ;)</p> <p>PS: for no Brand Display Cover, watch my other designs.</p> <h3>Print instructions</h3><p>The brackets will be better with supports.</p>