Easy and filament friendly Ikea Lack Enclosure (Ender, Prusa, Anycubic,...)

prusaprinters

<p>Easy and fast Ikea Lack Enclosure for your 3D Printer.<br>It fits 50cmx50cmx 0,2cm Acrylic glass on three sides<br>Backside is a 61cmx55cmx0.5-1.5cm woodplank<br>you can fit 2 120mm Fans in the backside when cutting out the holes (Advise: 1 Intake Down, 1 Outtake Up)</p><p>The Fan covers will be uploaded later on if you Interested</p><p>IMPORTANT: YOU NEED TO PRINT EVERY FILE TWICE SO YOU GOT 2 FEET OF EACH FILE. IN TOTAL YOU NEED 8 FEET.</p><p>THE ONES WITH THE BIG HOLES GO IN ON THE TOP<br>THE ONES WITH SMALL HOLES ON THE BOTTOM</p><p>You just need 2 Ikea Lack tables no matter which color.<br>and:<br>4x 12.5cm Hanger Bolt for wood<br>4x 6mm x 1cm head x 5.5cm long woodscrew<br>2x Hinges<br>1x Magnet closing Mechanism<br>1x Handle to open front door<br>3x Acrylic glass 50cm x 50cm x 0.2cm<br>1x Wood plank 61cm x 55cm x 0.5-1.5cm<br>22x Small wood screws</p><pre><code class="language-plaintext"> Nails as much you need </code></pre><p>If questions are coming up feel free to ask</p><p>I will Upload finished pictures as son this build is done</p><p>Have fun!</p><p>Instructions:</p><p>1.Build 1Table</p><ol><li>Take the 4 legs of the other table and put the caps with die big hole on the side where you would put the bolt. and screw the hangerbolt in (3.5cm ONLY!)</li><li>Screw in one screw into each side of the leg where you find the plastic plate</li></ol><p>screw all 4 legs into the table</p><ol><li>take the other 4 caps with the small hole and screw each one on the plate right above the legs with the 6mm screw</li></ol><p>5.1. all Plastic plates should now reach into the air</p><p>Here you can put your Printer in so there´s no need to put it later on in</p><p>6.1. Fit in the two Acrylic glasses while putting them tables together</p><ol><li>Put the other table on top of the caps and as in step 3 repeat it<br>7.Now fit the back wood on and nail it in</li><li>But the hinges on the last Acrylic glass and then screw the hinges on the side of the table with the reaming wood screws</li><li>open the door and fit the magnetic closing mechanism in and also the Handle<br>10.fit the Cable through the cable hole and off you go you´re done</li></ol>