Easter Eggs Crasher: Crash Site

pinshape

Easter Eggs Crasher: Crash Site Get ready for a blast at Easter with this fun 3D printing model set designed for the whole family! Version 1.0 Optimized for 0.2 mm Layer, easy to print and assemble without support 17 STL-Files Longest part: 17.3 cm Sizes (assembled): Approx. 36 x 5.3 x 5.5 cm Do you know how Easter bunnies test Easter eggs? They don't just leave them alone! The Easter bunnies have secret test methods, and one of them is this Easter Egg Crash track designed by GRAVITYSHAPES. Since Easter is the only time to play with food, there's an original Easter-Egg-Crash-Road from GRAVITYSHAPES to print. Whether single-colored or brightly colorful, the parts can be easily printed and put together. A 3D printer, two cords, and boiled eggs are all you need! The set is designed to be easy to print and assemble. The cars are driven to the ends and loaded with boiled eggs. On command, each person pulls on its cord, causing the loaded wagons to move towards each other. In the middle, the top of the eggs crash under the sign “CRASH SITE” (There's also a blank signboard without text to label). Which egg will be preserved? And who wouldn't want to pull the cord now? The 3D printing set is optimized for 0.2 mm layers and 0.4 mm printhead (thinner goes, of course.). All parts have been designed so that no support is required when printing. If you print the parts as you find them in the STL, you don't have to print any supports. The set can be plugged together. Glue is optional, but it's not required if the print results are good. For more printing tips and information (in English and German) about Easter Eggs Crasher visit: Printing-Tips for this Easter Eggs Crasher Product-Info for this Easter Eggs Crasher 3D View of this Easter Eggs Crasher