Early Corinthian Helmet with Stand

myminifactory

This product includes the following items. 1. Early Corinthian Helmet (Wearable)- Helmet (one-piece version).stl- Helmet P1.stl- Helmet P2.stl- Helmet P3-F.stl- Helmet P3-R.stl- Joint connection 1.2mm.stl- Joint connection 1.3mm.stl 2. Helmet Stand- Stand Base.stl- Stand Base (without Bottom Round).stl- Stand Connection parts.stl- Stand Top.stl 3. Crest (prototype)- Crest Left.stl- Crest Right.stl- Crest Horsehair Holder.stl- Helmet P3-F for crest.stl- Helmet P3-R for crest.stl 4. Transverse Crest (prototype)- Transverse Crest Front.stl- Transverse Crest Rear.stl- Transverse Crest Horsehair Holder.stl- Helmet P3-F for transverse crest.stl This helmet was designed based on actual size artifacts. The thickness of the helmet is approximately 2.8mm. The helmet is divided into four parts: upper F/R, middle, and lower, and each can be combined using Joint Connection. The filament (PLA) consumed when printing a helmet is approximately 450g, and printing takes approximately 63 hours.(Stand for helmet : 140g / 19h) To print this helmet, your FDM printer will need a print volume of at least 200mm (depth) x 185mm (width) x 265mm (height). Also, since the head size varies depending on the person, before printing this helmet, be sure to refer to the internal specifications of the helmet and adjust the scale to the size that suits you before printing. This product also includes a unique stand for helmet mounting. **Crest is not originally included in this product, but it is a prototype currently under development, so we included it for free.** **We recommend printing with a FDM printer.** Please look forward to the future products of BLUE SAND! Thank you : )