Eachine TX03 FPV camera mount with double guard protection cover for Eachine E010, JJRC H36 or FuriBee F36 Tiny Whoop mini drones

thingiverse

I adapted the design of "Eachine TX01 TX02 FPV camera mount with double guard protection cover" to fit the Eachine TX03 FPV AIO mini camera, which comes with a first person view and an all-in-one board. I created new mounts and guards for this camera, combining them into 18 different kits ready for printing. You can also download each part separately. Before installing the camera in the mount, you might need to cut some of the black glue protection off the power wires (red and black) where they are soldered to the board. This is because they may be oriented vertically, making it hard to insert them correctly into the space for the mount. I had to remove a bit of this protection on my TX03 model to get the wires to fit properly. To install the camera in the mount, you should first insert the left side while rotating the camera, then the right side (with the lens facing you). Press it firmly until it clicks into place. Make sure not to force it too hard, as this could damage the camera or the mount. The piece has been printed with PLA 1.75 filament using Cura slicer software with a 0.4 mm nozzle and choosing for shell thickness 0.8 mm. Because the insertion guards holes have thin walls, I used a 25% infill to ensure they are strong enough. Here is the list of parts: Mounts (double or single protection): - double-2.4-tiny-whoop-eachine-tx03-camera-mount-sxs.stl - double-2.0-tiny-whoop-eachine-tx03-camera-mount-sxs.stl - double-1.6-tiny-whoop-eachine-tx03-camera-mount-sxs.stl - single-2.4-tiny-whoop-eachine-tx03-camera-mount-sxs.stl - single-2.0-tiny-whoop-eachine-tx03-camera-mount-sxs.stl - single-1.6-tiny-whoop-eachine-tx03-camera-mount-sxs.stl Guards / hooks parts (bent and straight versions): - bent-large-2.4-tiny-whoop-eachine-tx03-antenna-guard-sepela-sxs.stl (original design by "sepela") - bent-large-2.0-tiny-whoop-eachine-tx03-antenna-guard-diymik-sxs.stl (original design by "diymik") - bent-large-1.6-tiny-whoop-eachine-tx03-antenna-guard-sxs.stl - bent-short-2.4-tiny-whoop-eachine-tx03-antenna-guard-sxs.stl - bent-short-2.0-tiny-whoop-eachine-tx03-antenna-guard-sxs.stl - bent-short-1.6-tiny-whoop-eachine-tx03-antenna-guard-sxs.stl - straight-2.4-tiny-whoop-eachine-tx03-antenna-guard-sxs.stl - straight-2.0-tiny-whoop-eachine-tx03-antenna-guard-sxs.stl - straight-1.6-tiny-whoop-eachine-tx03-antenna-guard-sxs.stl Spacers (original design by "Diymik"): - spacers-1.0-tiny-whoop-eachine-tx03-camera-mount-diymik-sxs.stl