E3Dv6 Bowden X-carriage mount V2 reversed

thingiverse

I've noticed that the original design is impressive, but I'm experiencing a problem where I'm actually losing about 25mm of my Anet A8 print bed space. This modified version is essentially reversed and relocates the fan duct to the opposite side in order to position the nozzle more towards the back of the printer. It incorporates the Tronxy style sensor mount, both a 12mm (6mm radius) variant and a sensorless option. I've kept the fan duct mounting holes relatively small and secured it with tiny wood screws called "spack schrauben" in German since I really don't want to mess around with them. Make sure to align the heatblock and sensor cables as shown on these photos, with the longer end pointing towards the back, allowing the cables to run to the left of the carriage. Failure to do so may result in melting the filament cooler. Custom Section Things You'll Need: X-CARRIAGE.stl only from the Prusa i3 rework kit available at http://www.thingiverse.com/thing:119616/#files E3D Fan Duct found at http://www.thingiverse.com/thing:547325 Skynet Settings I've been using the config from "A8- 5buttonkeypad- autolevel- stock anet sensor" and modified these settings to ensure the probes level correctly and center the nozzle accurately. These settings work perfectly for me, but that doesn't mean they'll work flawlessly for you. #define X_PROBE_OFFSET_FROM_EXTRUDER -20 #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 #define Z_PROBE_OFFSET_FROM_EXTRUDER -1 #define X_MAX_POS 240 #define X_MIN_POS -20 #define Y_MAX_POS 220 #define Y_MIN_POS -10 #define Z_MAX_POS 240 #define Z_MIN_POS 0 #define LEFT_PROBE_BED_POSITION 20 #define RIGHT_PROBE_BED_POSITION 210 #define BACK_PROBE_BED_POSITION 220 #define FRONT_PROBE_BED_POSITION 30