E3D V6 Volcano Support for CR-10 Printer

grabcad

The initial version includes a mount for an E3D V6 with Volcano hotend. Additionally, it has parts to hold the CR-10 PLA cooling fan and direct air beneath the nozzle. Important points include: 1) when in use, the print area loses approximately 5mm on the Y axis; 2) print components in ABS if feasible; 3) prior to initial homing, ensure to lower the print bed and adjust as needed; 4) though not optimal, it is functional; 5) assembly requires two self-tapping screws (2.9x10mm), two M3 x 10mm screws, and two M3 x 6mm screws with washers. Future plans involve using PLA cooling fans on both sides after receiving new ones, resulting in a redesign aiming to prevent Y-axis space loss.