E3D V6 universal fan ducts (for 5015 fan or for 2x 4010 blower fans)

thingiverse

Update 21.03.2022 5015 fan duct 3.STL / 5015 fan duct 4.STL / 5015 fan holder 3_4.STL added This version bring fan a bit higher which helps to avoid collision with printing parts while printing. I did some experiences and found that slight offset of the fan duct by nozzle helps to bring the air flow directly under the nozzle. Version 5015 fan duct 4.STL where created then. 5015 fan holder 3_4.STL compatible with new fan ducts. These are two designs to mount 5015 or two 4010 blower fans on almost any printer equipped by E3D V6 or e3dv6 like hotend. For 2x 4010 blower fans mount you will need 8x M2x8 screws, 8x M2 nuts, 1x M3 insert, 1x M3x40 screw (i think that zip tie should work in case if you don't have a M3x40 screw and insert) To print this part use orientation as shown on the image and use supports. Raft is optional. For 5015 fan mount you will need 1x M4x20 screw and 1x M4 nut. I would reccomend to glue fan duct and fan holder together for better stiffness. If you have questions or suggestions feel free to comment.