E3D V6 Mount with Fan for CTC / Flashforge / Replicator

pinshape

I wasn't completely happy with the available E3D V6 Mounts for my CTC, so I designed and created my own version. There are 2 versions available - they're identical but different! I don't recommend using V003 for single or V007 for dual setup unless you have to. For assembly, you'll need 4 M3 nuts, 2 M3x30 screws (the design doesn't care about the head style, but it's designed for countersunk), 2-4 screws to mount the 40 mm fan, 2 M3x20 screws to attach the whole thing to the extruder carriage and one push-in fitting for the 4mm (OD) bowden tube. For the extruder, I used a standard spring-loaded extruder and attached it using the 000 parts on the back (the CTC already has the correct mounting holes). The current version for single extruder conversion is V003. The current version for dual extruder setup is V007 - you can choose to use my part cooler design or just go with your own. The left hotend has around 1 mm play for height adjustment. Update: I just added a .rar file with all released models as .stp files Printer Settings: * Printer: CTC 3D * Rafts: No * Supports: Yes * Resolution: 0.2 * Infill: 25%, 4 Shells Notes: I only used support on the bridge part to keep the mounting for the hot end smooth. Post-Printing The horizontal nozzle-distance is 36 mm (in software, make sure to measure the actual value). You'll need to attach the extruder mount to the top-most position of the back panel of your printer - otherwise it may interfere with your spools/spool holder.