E3D V6 Mount Geeetech A10 A10M A20 A20M

thingiverse

E3D V6 Mount A10 A10M A20 A20M Designed to mount on the existing A10 X carriage, two M5x30mm SS Hex head screws provide more support and key in place of original dome head screws for top roller bearings. This allows for quick removal and replacement, secured with M3 screws the same as cage was mounted. (bottom roller bearing screw remains unchanged) The design includes a version with mount for A10 hotend PCB to be mounted above and facing front for easy cable access. The PCB can be mounted in front or behind the PCB mount. This mount is compatible with 1 or 2, 4010 blower part cooling fans and matching fan duct. When using only one part cooling fan, you can mount the fixed mount probe (FMP) 12mm there instead of a second fan by utilizing "mount probe" to position the probe closer to the hotend. When using two part cooling fans, the probe is mounted outside of the part cooling fan using "mount probe fan". Fans or probe can be mounted left or right as it suits your build. Fan and Probe mounts utilize M2 screws. Fan top 8mm, Fan Bottom 12mm, Fan Probe 16mm. A box set of M2 screws with 30 x 4,6,8,10,12,16mm was purchased. Due to the availability of M5 Hex Cap Head bolts in two sizes, 8.6mm (knurled) and 8.0mm (smooth), four versions of back plate were created. Each version offers a choice between with PCB mount or not, and between M5 8.6mm or 8.0 mm hex head. A label is added to the back plate indicating M2 and 8.0 or 8.6. It is recommended to print this design in high temp filaments. PETG was used for the prototype. Updated: BLTouch mounts are now available for comment requests, including "A10M_V6 Mount BLTouch Fan M2" and "A10M_V6 Mount BLTouch M2". These can also be mounted on either side of the build. For those interested in a purge bucket design for this E3D V6 Hotend Mount, visit: https://www.thingiverse.com/thing:4459509 For a Prometheus 3 in 1 Filament Switcher, visit: https://www.thingiverse.com/thing:4459555