E3D V6 bowden mount for Wanhao Duplicator i3 with cooler and LED lights

thingiverse

There is a couple of similar designs here, at Thingiverse, but for those, your nozzle gonna be a completely different spot on the original machine. And therefore you gonna lose some print area. This carriage was designed to have the X and Z in the same exact spot with the V6 as the original head. Only there is as little as 15mm difference in Y, for this you need to remount the Ymin homeswitch. After all of this, you won't lose any print dimensions, so you can still print at (200x200x180mm)! For the mount, there is a partcooler as well, where you need a 50mm radial fan. An addition for these, you can mount three pieces of 5mm LEDs, so you can illuminate the print with it. You can give power to these LED's from the headcooling fan powersupply, in parallel wiring. In the mount there is a small hole for cable ties, so you can organize your cables nicely. For the mount you need also the following parts: two M4 30mm socket screws, three M4 25mm socket screws, eight M4 8mm socket screws, and five M4 hexnuts