E3d_V6

thingiverse

Here is the rewritten text in American English, without any foreign characters: Based on the model published here: https://www.thingiverse.com/thing:981239 I was not satisfied with the original design because the heater was located too low and the mounting was too weak. In my version, I moved the motor up to increase printing height by a few centimeters, added thicker mounting screws, and made it possible to adjust the fan housing height. I also added a simple belt fixation mechanism with a tensioning screw. For the bearing, I used a 624ZZ bearing. The M4 screw serves as its axis. Standard LM8UU bearings were used for sliding on axles. Everything is held together with M3 screws. Some long screws were cut to size using wire cutters and aligned using a file. The fan measures 40x40x10mm, and the cooling element is a DC 12V 50mm spiral. The blow nozzle can be any type, so it's not included in the package. You can download one here: https://www.thingiverse.com/download:1549770 or here: https://www.thingiverse.com/download:2057468. When printing, keep in mind that you may need to adjust the nozzle size compensation factor depending on the layer thickness and nozzle type. For a 0.4mm nozzle, I recommend setting it to -0.2. The recommended layer thickness is 0.1-0.2mm.