E3D Titan Mount for Vulcanus V1 x-carriage

pinshape

This is a quick design I made for my Vulcanus V1. I wanted to use it with the E3D Titan Extruder and an E3D V6 hotend without replacing the x carriage, so I made a design for the Nema 17 mount and the bowden adapter for the E3D Titan Extruder. To build this, you'll need: E3D V6 hotend (or any other hotend that will fit on the Vulcanus V1 2016 x carriage) E3D Titan Extruder the printed parts (made from ABS plastic) some Acetone (be careful when working with acetone - always wear a respirator) First, build your E3D Titan completely, including the short piece of teflon tube to line up the assembly perfectly. Next, put some acetone on the Nema 17 mount and push it into place. Don't glue the bowden adapter onto the carriage - if you do so, you won't be able to remove the extruder without damaging the carriage. For 1.75 mm filament, use a small Nema 17 motor (like the 17HS08-1004S) with its gear ratio. This will give it enough torque for extrusion and work fine (3 x 13 Ncm = 39 Ncm). Your x-carriage will become much lighter. See Thomas Sanladerer's video for more information: https://www.youtube.com/watch?v=tiAQ9slUZ58 Ignore my wiring and the full-size Nema 17 - the printer isn't finished yet!