E3D Titan Mount for TEVO Black Widow (Optional BLTouch)

thingiverse

This mount is specifically designed for the TEVO Black Widow, a printer that has been discontinued by its manufacturer. I have since sold this machine, so it's no longer in my possession. Versions 2-3 of the Titan mount come equipped with holes for the BLTouch system, and using one of the included spacers will allow you to install either your v6 or volcano hotends. The Z offset is typically around -1.00mm. Version 2-4 of the Titan mount does not have the extra features required for a BLTouch installation. However, holes in the X Carriage Adapter Plate can be tapped with M5 or M3 screws. You can use your original stock 40mm fan as the part cooling fan if you still have it from the original kit. A clearance hole has been provided to give access to the tension bolt; simply insert an allen wrench through the back of the X carriage. This assembly will grant the X axis 370mm of travel. Print Settings: Printer: TEVO Black Widow Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% BOM: Components: E3D Titan Extruder (authentic) - $68 http://e3d-online.com/Titan-Extruder https://amzn.com/B01F5Z3TRA Suggested Stepper Motor - $16 https://amzn.com/B00PNEQ79Q E3D Hotends - $84 (varies) http://e3d-online.com/E3D-v6/Full-Kit Note that the TEVO Black Widow runs on 24v, so be sure to get a 24v version. Nuts and Bolts: x4 M5 x 14mm Bolts (required for low-profile bolt behind BLTouch) x2 M3 x 8mm Bolts (for Fan Duct Mounting) x2 M3 x 12mm Bolts (for BLTouch Mounting, v6) or x2 M3 x 16mm Bolts (volcano) x2 M3 Nut (for BLTouch) x4 M3 x ??? (for part cooling fan) Note: The BLTouch link provided includes wire connectors and mounting hardware. This means that you will not need to purchase the additional BLTouch hardware listed above.