E3d Servo auto level prusa i3 or hypercube

thingiverse

VIDEO TUTORIAL I USED TO SET UP AUTO LEVEL https://www.youtube.com/watch?v=awsI9bMndJA&t=15s Update 12/5/16 Fan duct rev 2 fixed mounting ear removed front of duct so i can see my nozzle the old version made hard to make sure my first layer was going down right i added 2 nozzles to aim air at the front Print with supports touching build plate for best results 12/2/16 Fan duct added not perfect one mounting whole is off i just drilled one ill fix it later this week print in cura with supports touching build plate only Rev 2.1 bigger servo whole Update 11/28/16 Rev 2 I've made the servo mount more narrow so we do not lose as much travel on the x axis i had to trim it to fit the servo so i will be making the servo hole a bit bigger so it will fit better I made my own servo arm because i could not find one that was long enough it's not perfect i'm test printing today Update 11/26/16 I plan on making a duct that circles the hot end I also plan on making extended ducts for the e3d volcano let me know in comments if you want that Also working on a 3 mm screw version I liked tech2c version but i like servo auto level so i remixed it Clamp made by tech2c I just put it here so its all in one spot 0.2 layer height 0.2 first layer No support 2 walls 0.8 mm Thank you Tech2c http://www.thingiverse.com/thing:1632847 Print Settings Printer ebay prusa i3 wood Rafts no Supports no Resolution 0.2 Infill 25