E3D Revo CR Adapter for Creality CR-10S Pro / Pro V2

thingiverse

Any Creailty CR10S Pro /Pro V2 owner who wants to upgrade his system hot nozzle to E3D Revo CR finds out (before or after purchase) that the BL sensor and the fan buck touch the bed as the E3D nozzle is too short. Don't let it hold you back, on the contrary, this nozzle is highly recommended and you will be amazed by the quality coming out when installing it on CR10S pro system. This adapter is based on Jrjy3 work - https://www.printables.com/model/452757-creality-cr-10s-pro-pro-v2-e3d-revo-cr-adapter It mount to the original Creality CR10S hot-nozzle bracket. Exact fit to the two-bracket lug for stability and to prevent any movements or shake, in addition to the two M3x8mm screws. The hot-nozzle mount the adapter with M3x22 screws with M3 nuts locker at the end. Nuts are exactly fit for the M3 holes lockers. The main modification for this mix are: Strong M3 nuts lockers with support, which allow PLA print with less infill. Mount holes for Creality CR10S hot-nozzle bracket for enhanced stability and improved grip. As a draft, I printed it in PLA with 25% infill in less than 25 minutes and it did a great job and worked great, I used it to print the final part so others can do that as well. To be on the safe side the final part was printed in PETG (ABS, ASA will do just great) with 50% infill in less than 40 minutes.