E3D clone Zero offset mount with integrated 2n1 40mm fan cooler

thingiverse

After combining these two modifications, I determined that merging them into a single part would make the process easier and more durable.\r\n\r\nIf you encounter any problems or issues, please notify me in the comments so I can correct them promptly.\r\n\r\nI modified the zero offset mount to accommodate square nuts since my printer lacks regular hex-shaped ones. Although it will still function with hex nuts, you'll need to hold them in place while tightening.\r\n\r\nInitially, I enhanced the stock cooling system by designing it to better clip into large bars that protrude from the existing clips.\r\n\r\nNext, I took it a step further and created a design that mounts to the top bracket as a solid piece.\r\n\r\nI'm currently resolving an extrusion issue with my printer, so I haven't tested printed or fitted this yet. Once I've completed these tasks, I'll provide pictures and remove this from "in progress."\r\n\r\nKNOWN ISSUES:\r\nThe initial version with the bars features inside nubs that are completely incorrect in size. I will need to address this issue but still wanted to release the files for others to attempt.\r\n\r\n____________________________\r\n\r\n5/15/17:\r\nI integrated the revised 2n1 fan shroud into this concept design, which should be better suited for the E3d Clone cooler. Unfortunately, I haven't had the chance to test print and fit it yet, as my printer is currently down, so the alignment may be off. Feel free to try it out and inform me if it's not centered correctly and by how much.\r\n\r\n5/21/17:\r\nAfter resolving the tension error and alignment issues on my printed version, I increased the space for the clone to fit in securely, as it's held by bolts rather than pinching the cooler. This final bolt-on-and-go version should be the final release unless others suggest modifications or encounter further issues.