E3D Chimera Mount for D-Bot (optional BLTouch)

prusaprinters

<p>This is a screw-on bracket for the D-bot print carriage for the E3D Chimera hot end. There is another option on here, but it replaces the entire front plate of the carriage, and I wanted to be able to more easily remove it without having to re-tension the betts, etc, by disassembling the carriage assembly itself. This screws onto the four mounting bolt locations used by the stock assembly without any modification.</p> <p>There are two versions, with and without a bracket for a BLTouch sensor, and there's a matching tubing bracket for the top of the carriage, spaced to match the two bowden tubes coming out of the Chimera.</p> <p>The extruder can be bolted to the bracket using the rear or the top screws. I actually did both -- two on top and one in the rear.</p> <p>I<em>think</em> this might work with a Cyclops, as I believe the dimensions are the same, but no promises. If you try it, let me know if it works.</p> <p>Edit: E3D seems to have made a change to the hot-end heat-sink. The newer ones are 32mm wide, not 30mm. I don't have one to verify fitment, but I've uploaded an experimental 32mm wide one.</p> Category: 3D Printer Parts