E010 TX01 TX02 Camera Mount, Very lightweight!

thingiverse

This is probably the lightest printable camera mount designed for the Eachine E010 Tiny Whoop! It's 1/3 to 1/10 the weight of other mounts available on the market. The designers have confirmed that it fits perfectly with the Furibee F36 as well. If anyone tries it out, please don't hesitate to share their experience or comment if they think there's anything that needs improvement - all feedback is highly valued! WEIGHT OF MOUNT 0 degree: ~2.3g 10 degree: ~2.5g 20 degree: ~2.7g MOUNTING INSTRUCTIONS 1) Remove the plastic cover of the E010. 2) Take out the screws of the PCB and remove the foam padding under the front part of the PCB. 3) Push the Eachine camera mount around the top of the PCB until holes line up perfectly. 4) Attach the PCB to the frame again with the screws. 5) Place a piece of tape under the camera PCB to isolate it. 6) Push the camera onto the holder securely. 7) Connect the camera to the power source immediately. 8) Get ready to fly! COMPATIBLE QUAD Eachine E010: www.banggood.com/Eachine-E010-Mini-2_4G-4CH-6-Axis-Headless-Mode-RC-Quadcopter-RTF-p-1066972.html COMPATIBLE CAMERAS TX01 (25mW): www.banggood.com/Eachine-TX01-Super-Mini-AIO-5_8G-40CH-25MW-VTX-600TVL-14-Cmos-FPV-Transmitter-p-1088374.html TX02 (200mW): www.banggood.com/Eachine-TX02-Super-Mini-AIO-5_8G-40CH-200mW-VTX-600TVL-14-Cmos-FPV-Camera-p-1088368.html DONATIONS If you find that this item improves your daily life, consider supporting the designer by sending a tip. Click "TIP DESIGNER" here. UPDATES 2017-01-11: New improved version released, Angles 0deg, 10deg and 20deg available now. 2017-01-10: Release of first version successfully completed!