E-Track Cargo bungee cord clip v2

prusaprinters

<p>Initial version of this was one of my first self-designed products shortly after acquiring my printer. After a few months of design and print experience, and failures of my original design, it was time to re-visit this.</p><p>The new design is much stronger, more user friendly and still easy to print. Improvements:</p><ul><li>There is now a strong frame surrounding the whole clip</li><li>The spring for the latch is now protected from users pulling it back too much and breaking it</li><li>It's easier to get a finger under the latch to remove the clip</li></ul><p>My recommended print settings:</p><ul><li>PETG or impact resistant filament</li><li>0.4mm nozzle</li><li>0.2mm layers (Important to make sure the clearance for the spring latch is maintained from the walls)</li><li>4-6 perimeters</li><li>2mm top and bottom minimum shell thickness</li><li>Detect bridging perimeters on</li><li>25% infill, I used rectilinear pattern</li><li>No brim</li><li>No supports</li></ul>