E-RING to secure the Stud into the Bed

myminifactory

E-Ring is used to secure the Stud Unit into the Bed rack. For Sindoh 3DWOX DP200/201, when the printer is idle, its Bed automatically moves to a default position that's set as low as possible. The Stud Unit serves as a fixture for the Bed, preventing it from moving when the printer is idle and the bed is at its default setting. Installing the Stud Unit has no impact on print precision or any other printer performance since the Bed will move to its standby position regardless of where it was initially located before the printer starts up. Occasionally, however, the Stud Unit can come loose from the Bed rack due to shocks during shipping that dislocate the E-Ring from the Stud. As a result, some users may find their Stud Unit rolling around on the bottom plate of the printer. If you experience this issue and can't locate the E-Ring, use this DIY design to print out your own replacement E-Ring. For further assistance or questions, please visit our website's Contact Us page.