E-Paper Weather Display Waveshare 7.5" ESP32

thingiverse

A housing for the Waveshare 7.5 inch display, a battery, the ESP32 and the charging electronics can be accommodated in the housing.The cost for all parts is about 75-95$You can find better documentation with links to the parts used here:https://spacepc.de/wetter-display-mit-esp32-und-3d-druck-gehaeuse/Necessary parts:Waveshare ESP32 Mikrochip Waveshare 7.5 E-Ink DisplayChargeelectronics (TP4056)Battery (3.7V) Jumpercabel (Not absolutely necessary, can simply be soldered instead)Batterycabel (Not absolutely necessary, can simply be soldered instead)Screws (2x10mm)Necessary tools:Soldering iron3D printer to print the housing. You can of course also build your own housing from wood/cardboard etc.The file Weather_Display_without_pockets.stl comes without pockets for the battery and the ESP32 so that you can use your own technology if required.Assembly:The display is attached to the front using double-sided adhesive tape. The ESP32 and the battery can be inserted into the housing. Unfortunately, the charging electronics are also glued as they have no cut-outs for screws. I simply used hot glue.Take care not to drill into the cables with the screws when screwing them together.Software:https://github.com/G6EJD/ESP32-e-Paper-Weather-DisplayPrint settings:0.2mm(standard), gyroid infill, tree support.