Dye Dam G36
thingiverse
Here are the files to make a G36 out of your darn thing aside from the printed parts you'll need: * A G36 Shroud (I chose the G36C, I think the others will fit too) * A G36 Top Rail * 3x M4 Screws, 30mm long * 3x M4 Nuts For the front of the shroud, I used two M4 flat-headed screws, shortened them to 22 mm, and combined them with a M4 threaded sleeve. On the backside of the top rail, I made slots for the M4 nuts. If you don't have metric screws, feel free to contact me and I'll change them. To slide the top rail onto the adapter, you'll need to remove the rear sight. Just take out the holding bolt, slip the rail onto the adapter, and put everything back in place. I'm from Germany, so if anything in this text is tough to understand, just let me know and I'll try to translate it again for you.
With this file you will be able to print Dye Dam G36 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Dye Dam G36.