Dust Collector Bucket Attachment

thingiverse

I browsed through the diverse dust collection attachments on the site and only found a few that really caught my attention, so I am now in the process of designing one myself. Here are the parts I have designed so far, all of which is currently for 1-3/4" as that's what I use. v2: I added new versions and an M55 thread to attach hoses and make custom curves and attachments. I haven't printed this yet, I am in the process of reordering some filament. Print recommendation: Twb010 has printed a version with a 0.8mm nozzle and 0.6mm layer height which resulted in some layering issues in the top half. After reviewing the issue and simulating some prints, with the angle of the spiral on the inside, the top should be printed at less than a .35mm layer height. I am going to be printing a test this weekend using 0.2 or 0.3mm. I printed out the top portion this weekend using a 0.8mm nozzle and .3mm layer height, my retraction settings were not optimized but other than that turned out well. Need to fine tune the inlet nozzle. 12-8-2017: I uploaded a new version of the bottom, removed the fins, thinned the walls slightly and expanded the base to add more room for fasteners. 12/18/2017: After printing V2, I added V3 which adds a little more clearance to fit the bottom to the top. Will be adding test videos soon!