
Duplicator i3 e3d v6 adapter
thingiverse
This adapter is designed to fit the e3d v6 onto a Wanhao Duplicator i3, Cocoon Create, or Monoprice Maker Select printer. It should work with versions v1, v2, and v2.1. This version has been completely rebuilt but draws inspiration from Piggyjj's model. It includes four holes for the e3d clamp to prevent hotend tilt to one side. Three prongs are also included for belt use instead of the original screw/bolt system. The bolts have problems flexing when tightened and pulled by the belt, which works in metal design but struggles in plastic design. Two versions are available: one for a setup with two top x carriages and another designed for one top carriage. It's suggested to combine this adapter with modified bearing holders or printed versions to fix the belt rub issue. This adapter requires 2x m3 25mm bolts. Standard long black hex head m3 bolts used in the mk10 extruder can be used in the bottom two holes of the clamp. With ptfe tube running all the way up to the bottom of the mk10, ninjaflex (tpu) has been successfully printed with this setup. Printer: Wanhao Duplicator I3 (Cocoon Create) Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 - 0.25 Infill: 10-15%
With this file you will be able to print Duplicator i3 e3d v6 adapter with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Duplicator i3 e3d v6 adapter.