Dummy Li-ion

prusaprinters

<p>I needed a dummy li-ion which allows me to charge Lipo's on my li-ion charger. This dummy has roughly the same outer dimensions as a normal li-ion, while having a flat bottom surface for both easy printing as well as stable placement.</p><p>Spade connectors are used to for the positive and negative terminals. Simply take a spade connector and pull the plastic end cap off with some pliers. Insert the connector in the holes on either ends. push the connector as far as it goes. Depending on your print quality you may need to drill out these holes with a 3mm drill. After inserting the spade connector all the way bend the flat end.</p><p>Once the spade connectors are in place you can connect banana plugs to the 2 holes at the top.</p>