duet 0.8.5 / DuetWifi holder and feet for 2020 kossel mini

pinshape

Summary These are the components to hold duet 0.8.5 under build platform of the kossel mini with 2020 extrusions. Specifically for the base side extrusions of 24cm. It also includes feet to raise the printer above the table and optional rubber shoes (to be printed from rubber filament) for the said feet. They greatly reduce noise levels. I do not have a panel due and I do not plan to have one, so I am unsure if it works well together. To use this setup, you need to print 3 feet, 4 holder parts, and optionally 3 rubber shoes. In addition, you will require 3 M5 nuts 3 M5x20 screws M5 tap 4 T-Nuts 8 M3x10 screws (or 4 M3x10 and 4 M3x8 or M3X6 screws) 4 M3 nuts Once you have all the necessary parts, you can follow your instincts and refer to the provided pictures to assemble everything. I have attached both original STLs and netfabb-repaired files just in case. 2016-09-10: I have confirmed that DuetWifi has the same dimensions. Print Settings Printer: Kossel Mini Rafts: No Supports: No Resolution: 0.2 layer Infill: 25%