Ducati Monster 1200 S disk lock antitheft holder
thingiverse
This device allows you to hold an antitheft disc locker on your ducati monster. Two bolt & nuts are required to hold the two part together and lock it on the frame of the ducati monster. Instruction: - print & clean the part. Use strong materials such at PETG that resist higher temperatures - insert the two nuts in the smaller part (see picture) and the two bolts on the bigger part - place the smaller part behind the frame (you might release the cable fixed on the top tube of the triangle during this operation - do not forget to put it back after) - the smaller part should be perfectly adjusted to your frame. If it is not the case, adjust (sand paper / black duct tape). - while holding the smaller part, place the bigger part on the top of the smaller one. Again adjust if needed - screw both bolts firmly This is it ! The disc lock I used is "kooroom" brand. You might have to adjust the design to fit other brands PS : You might need to sand the part (you can use medium sand paper or just rub the part on the ground) so that it fits well on your ducati : not all models are exactly the same.
With this file you will be able to print Ducati Monster 1200 S disk lock antitheft holder with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Ducati Monster 1200 S disk lock antitheft holder.