DualDrive & V6 direct drive mount for Tronxy X5S with the SBase firmware

prusaprinters

<p>This DualDrive Extruder is mounted as direct drive with V6 hotend. The Tronxy X5S' original metal X carriage is kept to ensure the ridged hotend installation. Though, need to drill 6mm hole for the stepper axle if direct drive installation is used.</p> <p>For the extruder 22mm 'pancake' nima17 stepper is reuired<br/> The unit is made for 4020 radial blower to ensure equal 360-cooling.</p> <p>Many parts has insulation wall to aid printing ABS with open printer. ABS or other stiff higher temperature filament.Also raft is recommended to avoid warping.(To print with-out the walls reduce printable wall width below 0.39mm)</p> <p>This set-up will move the hotend nozzle 15mm forward so the bed should be moved that much in -Y direction to keep 330 printing area. On the other one hand the nozzle runs 15mm higher so ZMax can be set as 415mm get bit higher maximum print size.</p> <p>Update: Fan shroud is now 1mm thinner &amp; streamlined</p> <p>Add-on, getting the full printing space:</p> <p>Moving the board is a quite easy job. Here's the drilling jig for the job. Put the Z-rail screw on the other end, place the jig on the existing hole and drill 4mm holes on the front of the current holes.</p> <p>Also the bed wire holder needs to be a bit longer and notice <a href="https://www.thingiverse.com/thing:3951448">https://www.thingiverse.com/thing:3951448</a></p> <p>Added the Marlin 2.0.0 config-files for MKS Sbase but also 'firmware.bin' if you're not fancy to compile it by yourself. Place firmware.bin to the microSD card and restart the printer.</p> Category: 3D Printer Extruders