Dual Z Axis MKS Sbase 1.3
thingiverse
To ensure the Z2 axis operates correctly with the extruder connector 2 without a splicer, verify that no step, direction, or enable configuration values for the E1 slave step motor driver are present in the Smoothieware configuration file. For instance, if you're using E1 as a slave, delete any of these values from the configuration file: extruder2.hotend.step_pin extruder2.hotend.dir_pin extruder2.hotend.en_pin Remove jumper pins JC_M4 and JC_M5 except for GND according to image 2. In the Config.txt file, set equal current values for both drivers. For example, if you're using beta and delta settings: gamma_current 1.5 (Z Axis) epsilon_current 1.5 (Extruder E1) The attached config file is configured to use BLTouch and MKS TFT 2.8.
With this file you will be able to print Dual Z Axis MKS Sbase 1.3 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Dual Z Axis MKS Sbase 1.3.