Dual WaveShare 4.2“ desktop e-Paper case - symmetrical and without holes

prusaprinters

<p>Dual WaveShare 4.2“ desktop e-Paper case - symmetrical and without holes</p><p>&nbsp;</p><p>Dual display version of my “<a href="https://www.printables.com/de/model/214253-waveshare-42-e-paper-case-symmetrical-and-without-">WaveShare 4.2“ e-Paper case - symmetrical and without holes</a>” display case as desktop variant.&nbsp;</p><p>&nbsp;</p><p>It can hold up to 2 ESP32 controllers and up to 2 LiPo batteries with 10000mAh and of course 2 WaveShare 4.2” e-Paper displays.</p><p>The inside is almost empty space so you will have lots of free space to keep the ESPs, displays and batteries.&nbsp;</p><p>The outside is kept small with a footprint of: 120x100x45mm (WxHxD).</p><p>&nbsp;</p><p>Note: If you already printed 1 display holder from this version “<a href="https://www.printables.com/de/model/214253-waveshare-42-e-paper-case-symmetrical-and-without-">WaveShare 4.2“ e-Paper case - symmetrical and without holes</a>”, you can reuse it for this variant and have to just print another display holder and the dual lid of course.</p><p>&nbsp;</p><p>Printing instructions:</p><ul><li>I used the 0.2 speed profile and just turned the skirt off and 215°C for the nozzle</li><li>For the 2 display holders an additional 5mm brim was set</li><li>The 4 rings werde printed without a brim and with 100% infill</li><li>The dial lid was printed without a brim</li><li>The dual lid part needs supports from the print bed as the only part</li></ul><p>&nbsp;</p><p>Happy printing :)</p>