Dual J-Head Raised Mount
thingiverse
The dual extrusion version of my raised J-head mount features the same components as before, including a main mount, front piece and an air guide to direct fan air towards the peak barrel. Upon installation, the J-Head nozzles should be 8mm below the X-Carriage mounting plate. I have printed this design and find that the measurements are accurate. A second version of the Main has been created with shortened motor supports for increased wiring space at the rear. Print this model with a minimum infill of 40% and use support to manage overhangs. Drill or ream holes as necessary, and use hardware including 2 x (20mm M5 bolt + nut + 2 washers), 2 x (16mm M3 machine screw), 4 x (40mm M3 machine screw) and 4 x (20mm M3 machine screw). My software offset measurements are X=35.2mm and Y=0.75mm, providing a starting point for customizing your settings.
With this file you will be able to print Dual J-Head Raised Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Dual J-Head Raised Mount.