Dual head Calibration Plate - Checker board
thingiverse
This is a checker board pattern for helping to confirm calibration of a dual head printer. It will test XY axis alignment as well as ooze control for the idle head. The pattern of colors reverse during the second half of the print to give a third direction of reference for adjustments. The two parts are Cura scaled and oriented for printing. With the two parts loaded in the print space you select Dual Extrusion Merge and the parts will combine as a single print with two colors. Whichever part is loaded first will be the primary head and the second one will be the other. For best results use calibrated filament. You can find calibration clips for printers that can hold a 0.1mm tolerance or better here: http://www.thingiverse.com/thing:1037301 I use these clips to calibrate my filaments as shown in the images. Print Settings Printer: ReliaBuild 3D Dual (RB3 Dual) Rafts: No Supports: No Resolution: 0.1 mm Infill: 20% Notes: I used an ooze shield around the print. Retraction settings for particular filaments will vary and may need to be adjusted.
With this file you will be able to print Dual head Calibration Plate - Checker board with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Dual head Calibration Plate - Checker board.