Dual Half-size Breadboard Tray
prusaprinters
<p>This breadboard tray makes working with wide development boards easier by giving you access to all the pins holes instead of covering up most of them.</p><p>The spacing between board rows is 1" which works for the ESP32-S2-Saola board.</p><p>Not all breadboards have the same dimensions, tab locations or removable rails so check your breadboard before printing and cutting.</p><p>The power rail must be removed from one side of each breadboard. Before removing the rail, verify the notches are oriented in the correct direction. To remove the rail, cut through the foam backing along the seam then push the rail off the tabs.</p><p>The tray was designed to have a snug fit to hold the breadboard in place. This may be an issue if the printer calibration is off. A test outline is included to verify the breadboards fit before printing the whole tray.</p><h4><strong>Print Settings:</strong></h4><ul><li>Material: PLA</li><li>Layer Height: 0.2mm</li><li>Perimeters: 3</li><li>Infill: 15% Gyroid</li><li>Supports: None</li><li>Bed Adhesion: Skirt</li><li>Printing Orientation: Bottom-side down</li></ul>
With this file you will be able to print Dual Half-size Breadboard Tray with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Dual Half-size Breadboard Tray.