Dual Cross Laser Positioning System

thingiverse

This is a cost-effective dual laser positioning system that produces high-quality t-shirt prints. It eliminates the need for manual measurements, ensuring accurate alignment every time. You can build this system for around 20€, saving you hundreds of euros compared to buying a commercial solution. **Components You Need to Print:** - Three Connector pieces (one for the post and two for the lasers) - Three Endcap components (optional for a professional finish) - One Post Mount component - One Table Mount component **Components You Need to Buy:** - Two Cross Lasers with 12mm diameter - A 12mm Aluminium Pipe with 1mm wall thickness (mine measure 50cm and 20cm long) - Six M4 Nuts (two for each connector) - Six M4 Machine Screws (two for each connector, at least 12mm long) - One M6 Nut - One M6x40 Machine Screw - Three 4mm Countersunk Screws (length depending on the mounting material) - A piece of wood or a table to screw onto - Some wire, solder, and power supply for the lasers