Dual Axis Motion System!

cults3d

Our goal in the design of this was to create a multi-purpose motion control platform based upon GRBL and gcode using 3D printed and off the shelf parts. As we wanted to avoid the need to write C# code for Arduino by using the simpler concepts of Gcode to make this system more accessible to the masses. Also the idea is to use geared steppers for both their torque as well as holding power for heaver loads such as DSLR's or satellite antennas for Amateur Radio use. As the mountings are designed to connect to a standard 20x40 v-slot on either the top or side of the rail (see part list below). With this there is an azimuth mount which connects to the 20x40 V-Slot and the the elevation braket mounts to the azimuth via an 8mm rod guide with is drilled and tapped with an M3 one side to engage with the flat side of the D-shaft from the steeper. In addition the mounting holes of the rod guides where also tapped to receive 1/4-20 hex head bolts for mounting all of the pieces together. There is a thrust bearing (wash) which in between the azimuth and elevation connection with a 1/4 inch multi-hole base for the elvation. We have also included all of the Fusion 360 files too. Parts List: Geared Steppers: http://diy3dtech.com/geared-stepper-motors/ GRBL Control Board: http://diy3dtech.com/sain_smart_GRBL_board Power Supply: http://diy3dtech.com/12volt_10amp_pws V-Slot 20x40: http://diy3dtech.com/v_slot_20x40 Shaft Guides: http://diy3dtech.com/8mm_Linear_Rail_Shaft_Guide_Support_Bracket M5 T-Nuts: http://diy3dtech.com/M5_T_Slot_Nut M5 10mm Bolts: http://diy3dtech.com/M5_10mm_hex_head Don't forget our YouTube channel here: http://YouTube.DIY3DTech.com as if you want to see what we are up to daily which you do right? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog or follow us on Instagram at https://www.instagram.com/diy3dtech/ well read our posts on tumlr here https://www.tumblr.com/blog/diy3dtech Major Favor: if you make one of these please post the Make and share it with the community :-) . Also, **please follow us on Thingiverse and give this a like if this came in handy **and for more information on this project, please visit us at http://www.DIY3DTech.com as well as subscribe to our YouTube Channel at http://YouTube.DIY3DTech.com along with a visit to our drone site and YouTube channel at http://video-drone.DIY3DTech.com If you are looking for one of a kind swag shop for yourself or a Maker Geek friend, visit our swag shop at http://Swag.DIY3DTech.com for unique 3D Printing, Laser Cutting and CNC swag! Too, if you want a behind the scene look at what we are working on be sure to follow us on Instagram (https://www.instagram.com/diy3dtech/)!