Dual Attachment Effector Bracket for FL Sun or Delta Kossel Mini Printers

thingiverse

I created this enhanced bracket specifically for those Chinese Delta Clone Printers. The standard bracket that comes with them is subpar and only offers one place to attach a part cooling fan. The main issue is the attachment point is directly in line with one of the 2020 towers, so a large movement towards that tower will cause the attachment to crash into the belt and ruin your print. With this design, you get two part attachments for whatever you want to use (part cooling fans, z-probe, etc.) and they protrude away from the three 2020 towers (the 3 empty sides of the printer). This way, the printer can make long moves without worrying about crashing into the drive belts. The attachment points are also lowered to give the rod joints plenty of clearance so they don't bind. There is also a third attachment point for a 40mm fan to cool the hot end heatsink if you don't use a clip-on fan. This bracket should fit your standard Kossel Mini 6 screw effector like this: https://www.thingiverse.com/thing:1117095. I haven't personally tested it with the part above, but if you have something like it, it should work fine. Also keep in mind that this is designed to fit the Chinese clone hotend that came with my printer, so I can't guarantee the slot on the bracket will fit your hot end. I really hate seeing a nice part on this site but having to wonder if it will fit my printer, and then finally finding out after printing it that it doesn't fit. See the dimensions below and compare them to the diagrams to see if this will work for you. I have a YouTube video of my printer with this part installed too: https://www.youtube.com/watch?v=wHXiSY2NmiE. All measurements are in millimeters: Figure 1: A: 32.882 B: 7.00 C: 5.20 D: 3.50 E: 4.50 F: 3.00 G: 2.00 H: 3.25 I: 4.249 Figure 2: A: 11.80 B: 11.124 C: 19.574 D: 3.30 E: 20.107 F: 3.50 G: 12.703