Dual 5015 blower duct for Ender 3 V3 SE

thingiverse

Yes, A remix of a remix.TL;DR stock printers use:Duct_Left_Normal_Height_V2.stlDuct_Right_Normal_Height_V2.stlImportant update: After further experimentation and dissection I have found that the V3 SE uses the new experimental input shaping parameters. this means that you need to pay attention to the weight of the printed parts if it is more or less than the original hotend you will have to re-tune your input shaping parameters to print at or beyond the printers advertised speeds.M593Old post:I really liked the shroud and my new V3 was lacking in the cooling department. so after 4 test prints and a bunch of measuring I present the Dual 5015 blower for the V3.Please forgive my poor modeling skills I use sketchup so it's not perfect but it's functional-ish.I used extra X axis motor screws from a kit, the left side you can use a larger diameter screw and tap threads into the plastic for the fan if you don't have a nut compatible with the motor screws. For the right side the extruder screw is roughly 5mm too long I used a plastic washer you can always use the right size screw too I didn't have one, the hole is shared by the fan and the bracket for mounting.